Repointing & Repairs in Cwmbran

Repointing & Repairs in Cwmbran

Expert repointing & repairs treatment for properties in Cwmbran, Torfaen. Correct mortar specification matched. Free surveys with no obligation.

New town properties in Cwmbran, while relatively modern, frequently develop condensation problems due to the construction methods of the era. Rising damp and cavity wall issues are also common in older housing on the fringe of the new town.

Free Survey10-Year GuaranteePCA Qualified700+ Completed JobsNewport & South Wales

Repointing & Repairs Treatment in Cwmbran

Defective mortar joints are one of the most common causes of penetrating damp in South Wales properties. As mortar weathers and erodes, it opens hairline cracks and voids that channel rainwater directly into the wall thickness — particularly on exposed elevations. Incorrect repointing with modern OPC cement can make things worse by trapping moisture in older lime-mortared walls. EverDry Damp assesses the existing mortar specification and matches repointing materials precisely to ensure breathability and durability.

Cwmbran is a post-war new town in Torfaen, with a large stock of 1950s–1970s housing association and private housing. Our team covers Cwmbran and the surrounding Torfaen area regularly, and we understand the specific types of properties and damp challenges common in this part of South Wales.

!Signs You May Need Repointing & Repairs Treatment in Cwmbran

  • Visibly recessed, crumbling, or missing mortar in bed or perpend joints
  • Damp patches on inner wall face following rain
  • Cracking along mortar joints
  • Green algae or moss growth in damp mortar
  • White salt deposits on outer wall face

Our Repointing & Repairs Service in Cwmbran Includes

Full external elevation survey with moisture mapping
Raking out of defective, eroded, or cracked mortar to correct depth
Repointing with matched lime mortar, NHL mortar, or sand-cement as appropriate
Repair of cracked, spalling, or damaged masonry
Chimney stack repointing and flashings inspection
Application of clear breathable waterproof coating where appropriate

Common Causes

  • Natural weathering of mortar over decades
  • Previous use of incompatible hard cement in older lime-mortar buildings
  • Frost damage and freeze-thaw cycles opening joint cracks
  • Sulphate attack on chimney stacks from flue gases
  • Vegetation (ivy, moss) growing into and opening joints

Frequently Asked Questions — Repointing & Repairs in Cwmbran

Why does mortar specification matter?

Pre-1919 buildings were built with soft lime mortar. Repointing with modern OPC cement — which is harder and less breathable — traps moisture in the masonry and can cause spalling (face of bricks blowing off). We always analyse existing mortar and match the specification.

Should the whole house be repointed at once?

Not necessarily. We prioritise the most exposed elevations and areas where moisture ingress is occurring. Selective repointing of the worst sections is often more cost-effective and delivers immediate results.

Can you repoint in winter?

We avoid repointing when temperatures are at or below 5°C, as frost can damage fresh mortar before it cures. In South Wales, this limits us mainly to the coldest winter months.

Do you cover Cwmbran?

Yes — we cover Cwmbran and the surrounding Torfaen area as part of our regular service territory across South Wales. Call 01633 492662 to arrange a free survey at your Cwmbran property.

Ready to Solve Your Damp Problem?

Free survey. Honest advice. 10-year guarantee on basement waterproofing. Get in touch today.

Get In Touch

Book Your Free Survey

Fill in the form and we'll call you back to arrange a convenient time to visit. No charge for the survey. No obligation to proceed.

Phone
01633 492662

Mon–Sat, 8am–6pm

Based in

Newport, South Wales

Covering South Wales & Bristol

No charge. No obligation. We'll call you back.